Rice Lake 882IS 7.5VDC Intrinsically Safe Indicator, NTEP
The Rice Lake 882IS digital weight indicator is for use in hazardous environments where it is necessary to use intrinsically safe equipment. It features a NEMA 4X/IP66 rated stainless steel housing and can power up to (4) 350 ohm load cells or (8) 700 ohm load cells. Use with FM-approved load cells or scale bases for IS approval per official FM control drawings.
The 882IS is NTEP approved and can be used in legal for trade scale systems.
Features
- FM Approvals, NTEP certified, UL/cUL Listed
- Numeric keypad
- Up to 10,000 displayed resolution
- Supports up to (4) 350 ohm load cells or (8) 700 ohm load cells
- Seven-digit, seven-segment LCD display 121 x 24 dot matrix messaging area with white LED backlight
- NEMA Type 4X/IP66 rated stainless steel housing
- Display units in lb, kg, oz, or g
- Gross, net, center of zero, motion, and units annunciators
- Tilt stand included
- I/O module option: one serial port, optional analog outputs, optional fieldbus cards
- Duplex fiber optic interface
- Front panel digital calibration
- Automatic zero and span temperature compensation
Intrinsic Safety
FM/cFM
- Class I,II,III, Division 1
- Groups ABCDEFG T4Class I
- Zone 0 AEx/Ex ia IIC T4 Ga
- Zone 20 AEx/Ex ia IIIC T135°C Da Ta = -10°C to +40°C (14°F to 104°F)
ATEX/IECEx
- II 1 G Ex ia IIC T4 Ga
- II 1 D Ex ia IIIC T135°C Da
Additional Options
- IS6V2 Battery option
- IS6V2 Battery 100-240VAC NEMA 5-15 (North American plug)
- Power supply, 882IS mb-EPS-100-240-X2, dual output 6.8 VDC 200mA
- Power supply, 882IS mb-EPS-100-240-X2, dual output 6.8 VDC 200mA, 1/2 in NPT-M20
- Safe Area Module, 882 smart I/O interface
- I/O Interface Option Card: Single analog output (0-10VDC, 0-20mA, 4-20mA)
- I/O Interface Option Card: Ethernet/IP
- I/O Interface Option Card: DeviceNet
- I/O Interface Option Card: ProfiNet
- I/O Interface Option Card: Profibus
- I/O Interface Option Card: Modbus TCP
- I/O Interface Option Card: EtherCAT
Downloads
882IS Intrisically Safe Indicator Datasheet 882IS Technical Manual
882IS IS6V2 Battery Instructions 882IS 6V Battery Charger Instructions
882IS mb-EPS-100-240-X2 Power Supply Instructions 882IS Condition of Use
882IS IO Module Installation Manual 882IS Interface Option Cards Installation Manual
1 year manufacturer's limited warranty Rice Lake Weighing Systems® warrants that all Rice Lake Weighing Systems intrinsically safe (IS) equipment and systems installed by a distributor or original equipment manufacturer (OEM) will operate per written specifications as confirmed by the distributor/OEM and accepted
by Rice Lake Weighing Systems. All systems and components are
warranted against defects in materials and workmanship for one year. All Rice Lake Weighing Systems intrinsically safe equipment carries a Factory Mutual approval and is documented on various control drawings. Each device is manufactured Rice Lake Weighing Systems factory authorized personnel. To preserve the warranty and Factory Mutual approval, all repairs or replacement of circuit boards or components housed within the enclosures must be performed by Rice Lake Weighing Systems factory authorized personnel.
- Maximum Displayed Resolution:
- 1:100,000
- Maximum Resolution (NTEP):
- 1:10,000
- Weighing Units:
- lb, kg, oz, g
- Display:
- Seven-digit, seven-segment LCD display
- Keypad Controls:
- Zero, Gross/Net, Tare, Print, Units Conv, Start, Stop, Numeric keypad
- FM Approvals:
- Class I, II, III; Divisions 1, 2; Groups A, B, C, D, E, F, G, T4
- IP Rating:
- IP66
- NEMA Type:
- 4X
- Load Cell Excitation:
- 3.0 VDC at 87.5 ohm, 4.6 VDC at 700 ohm
- Load Cell Current:
- 34mA
- Load Cell Drive:
- Up to 4 x 350 ohm and 8 x 700 ohm
- Analog Load Cell Input Range:
- 0.6mV/V - 4.0mV/V
- Analog Load Cell Signal Sensitivity:
- 0.2 μV/graduation minimum, 1.5 μV/grad recommended
- Conversion Rate:
- 60 updates/second
- Operating Temperature Range:
- 14°F to 104°F / -10°C to 40°C
- Weight:
- 6.1 lb
- Brand:
- Rice Lake
- Model:
- 882IS Plus
