The Radwag PMV offers an accurate and faster solution for moisture analysis. The average duration of this process, depending on the type and mass of the tested substance, can take 1 to 10 minutes. Drying using the traditional halogen moisture analyzer takes 5 to 40 minutes, depending on the material being tested. The PMV 50 microwave moisture analyzer can be successfully used whenever materials containing large amounts of water are dried, for example: dairy products, fish, meat, fruit products, syrups, creams, liquid resin. Also in comparison to traditional Halogen heated moisture analyzers which heats samples from the sides the PMV heats the entire sample due to the use of the glass fiber filters and the microwave radiation emitter. This analyzer also features a temperature sensor that enables the device to monitor power settings to prevent exceeding the boiling point during the process. The 32 GB memory allows extended saving and storing of advanced reports, time, and statistical graphs.
Features
- Microwave Radiation Emitter heating element
- Extremely shortened drying time
- Intended for drying of samples containing significant amount of moisture (8-100%)
- Collected data stored in 10 databases
- Accuracy of Moisture readout at 0.05%
- 50 g capacity and 0.0001 g readability
- External adjustment
- Display is a 5.7” color touch screen
- 2 programmable proximity sensors
- Heating chamber is easy to clean without any special tools required
- Sample holder dimensions carry a 90 mm glass fiber filter
- Sample trace-ability
- Drying process graph
- Power supply 230 V 50Hz AC
- 32 GB memory
- Includes 60 glass fiber filters
- Sample of sodium chloride 10% ±0,5% to determine correctness of the operation at the workstation
- A service concerning determination of drying parameters for five customer-selected samples carried out by RADWAG employee
Functions
- Drying Modes
- Sample Drying
- Moisture Content Analysis
- Dry Mass Determination
- Microwave Drying
Documentation
PMV 50 Data Sheet PMV 50 User Manaual
- Capacity:
- 50 g
- Readability:
- 0.1 mg
- Moisture Content Readability:
- 0.05%
- Moisture Content Repeatability:
- 0.05% (ca. 1 g sample)
- Heating Element:
- Microwave Radiation Emitter
- Calibration:
- External calibration
- Finish mode:
- 4 modes (automatic, manual, time-defined, user-defined)
- Construction:
- Die-cast metal base, ABS upper housing
- Display Type:
- 5.7resistive colour touchscreen"
- Keypad:
- 8 keys
- Databases:
- 10
- Communication:
- USB-A, USB-A, RS-232, Wi-Fi 802.11 b/g/n, Ethernet 10/100 MBit, 4 x IN, 4 x OUT
- Power Supply:
- 230 V 50Hz AC
- Power Consumption:
- max 800 W (during drying)
- Heating module power:
- max 800 W
- Weight:
- 20 kg
- Brand:
- Radwag
- Model:
- PMV 50
